BJHVG - SEALING COMPOUND-GASKET TYPE III

  • MSDS: BJHVG
  • Manufacturer: P O B INC
  • Product Name: SEALING COMPOUND-GASKET TYPE III
  • National Stock Number: 8030-00-656-1426
Product Identification

Product ID:SEALING COMPOUND-GASKET TYPE III
MSDS Date:09/25/1989
FSC:8030
NIIN:00-656-1426
MSDS Number: BJHVG

Responsible Party
P.O.B. INC
11100 KENWOOD ROAD
CINCINNATI, OH 45442

Emergency Phone: (513) 793-6332

Info Phone: (513) 793-6332

Cage: LO748

Contractor
POB SEALANTS DIV OF ALLIED TECHNOLOGY INC
CINCINATI, OH 45242 US

Telephone: 513-793-6336

Cage: 28267

Ingredients

ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 20%

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192


PROPYLENE GLYCOL MONOMETHYL ETHER

CAS: 107-98-2

RTECS: UB7700000

Fraction By Weight: 4%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192


CASTOR OIL

CAS: 8001-79-4

RTECS: FI4100000

Fraction By Weight: 14%


SOYBEAN OIL

CAS: 68152-81-8

Fraction By Weight: 42%


SILICA AMORPHOUS HYDRATED, SILICEOUS EARTH, FUMED

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 15%

OSHA PEL 80 MG/CUM (%SIO2+2)

ACGIH TLV: 0.2 MG/CUM RESP/DUST


CALCIUM SILICATE

CAS: 1344-95-2

Fraction By Weight: 1%

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM


FIBER, NATURAL ORGANIC, CELLULOSE & OTHER CARBONYDRATES

CAS: 65996-61-4

Fraction By Weight: 1%

ACGIH TLV: 10 MG/CUM

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: KIDNEY DAMAGE, HEADACHE,
BREATHING DIFFICULTY. SKIN: IRRITATION. EYE: BLURRED VISION.
INGESTION: VOMITING.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: KIDNEY DAMAGE, HEADACHE, BREATHING
DIFFICULTY. EYE: BLURRED VISION. SKIN: IRRITATION. INGESTION:
VOMITING.

First Aid

First Aid:SKIN: WASH EXPOSED AREA W/SOAP & WATER. EYES: FLUSH W/LARGE
AMOUNTS OF WATER. GET MED ATT. INHALATION: REMOVE INDIVIDUAL TO
FRESH AIR.

Fire Fighting

Flash Point Method:PMCC
Flash Point:54F
Lower Limits:3.24%
Upper Limits:20.6%
Extinguishing Media:CO2, DRY CHEMICALS, FOAM
Fire Fighting Procedures:WATER MAY BE USED TO COOL CONTAINERS TO
PREVENT PRESSURE BUILD-UP AND EXPLOSION WHEN EXPOSED TO EXTREME
HEAT.
Unusual Fire/Explosion Hazard:CANS WILL RUPTURE FROM EXTREME HEAT.

Accidental Release

Spill Release Procedures:ELIMINAE ALL IGNITION SOURCES. BUILD DIKE OR
DAM TO CONTAIN MATERIAL ADD CLAYS SAND OR VERMICULITE TO MATERIAL -
USE A PLASTIC SCOOP TO PICK UP THE MATERIAL.

Handling

Handling and Storage Precautions:WATER MAY BE USED TO COOL CLOSED
CONTAINERS TO PREVENT BUILD-UP & EXPLOSION WHEN EXPOSED TO EXTREME
HEAT.

Exposure Controls

Respiratory Protection:RESPIRATORY ONLY IF TLV OR ANY COMPONENT IS
EXCEEDED
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:195F
Vapor Pres:29
Vapor Density:2.5
Spec Gravity:1.03
Evaporation Rate & Reference:(BU AC = 1): 1.5
Solubility in Water:0.86
Appearance and Odor:BROWN-MILD

Stability

Stability Indicator/Materials to Avoid:YES
HYDROFLUORIC ACID
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:CO2, CO

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.